Carbon Steel Pipes and Tubes,Alloy Steel Pipes and Tubes,Carbon Steel Pipes and Tubes Manufacturers,Alloy Steel Pipes and Tubes Supplier

Home » Pipes & Tubes

Pipes & Tubes

Stainless & Duplex Steel

Stainless Steel Pipes And Tubes

ASTM / ASME SA 312 GR. TP 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316TI, 316H, 316LN, 317, 317L, 321, 321H, 347, 347H, 904L.

ASTM / ASME SA 358 CL 1 & CL 3 GR . 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316H, 321, 321H, 47.

Duplex Steel Pipes And Tubes

ASTM / ASME SA 790 UNS NO S 31803, S 32205, S 32550, S 32750, S 32760.

Send Enquiry

Nickel & Copper Alloy

Nickel Alloy Pipes And Tubes

ASTM / ASME SB 163 UNS 2200 ( NICKEL 200 )

ASTM / ASME SB 163 UNS 2201 (NICKEL 201 )

ASTM / ASME SB 163 / 165 UNS 4400 (MONEL 400 )

ASTM / ASME SB 464 UNS 8020 ( ALLOY 20 / 20 CB 3 )

ASTM / ASME SB 704/705 UNS 8825 INCONEL (825)

ASTM / ASME SB 167 / 517 UNS 6600 (INCONEL 600 )

ASTM / ASME SB 167 UNS 6601 ( INCONEL 601 )

ASTM / ASME SB 704 /705 UNS 6625 (INCONEL 625)

ASTM / ASME SB 619/622/626 UNS 10276 ( HASTELLOY C 276 )

Copper Alloy Pipes And Tubes

ASTM / ASME SB 111 UNS NO. C 10100, 10200, 10300, 10800, 12000, 12200, 70600, 71500.

ASTM / ASME SB 466 UNS NO. C 70600 ( CU -NI- 90/10), C 71500 ( CU -NI- 70/30)

Send Enquiry

Steel Sheets, Plates & Coils

We offer highly customized steel plates, carbon steel coils, carbon steel sheets to our customers and provide them in different grades like, low carbon grade, high carbon grade and straight grade that meets the specific requirements of the clients. Stainless steel is the most ideal material for plates and the only material that requires almost no maintenance. Stainless steel is the least expensive material and they never chip or corrode and hence last forever.

Grade :	304, 304L, 304H, 316, 316L, 316LN, 316Ti, 309, 310S, 317L, 321, 347, 409, 410, 420, 430, 446 & 202
Sheet Finishing :	2B, 2D, HR, CR, BA (No. 8), Satin (Met with Plastic Coated)
Sheet & Plate in Form of :	Coils, Foils, Shim Sheet, Perforated Sheet,Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) & Angle, Channel, Tray Etc.
Pipe Fittings Services :	Heat Treatment, Annealing, Pickling, Polish, Electroplating, Anodising, Rolling, Cutting, Bending, Forging, Minor Fabrication Etc.
Test Certificate :	Manufacturer Test Certificate / Laboratory Test Certificate from Govt. Approved Lab. & Under Third Party Inspection.
Size :	Thickness: 0.1 mm to 48 mm, Width: 1000 mm to 2500 mm, Length: 2000 mm to Coil.

User Industries Sheets, Plates & Coils

Chemicals, Fats, & Fertilizers, Sugar Mills & Distilleries, Cement Industries, Ship Builders, Paper Industries, Pumps, Petrochemicals, Oil & Natural Gas Organization in terms of the specific materials, Technology, Finance & Personal.

Chemical Composition of Sheets/ Plates

ASTM	Grade	C max	Mn max	P max	S max	Si max	Ni	Cr	Mo	Pipe Fittingss
A240	304	0.08	200	0.045	0.03	0.75	8.00-11.0	18.0-20.0
	304L	0.03	200	0.045	0.03	0.03	8.00-11.0	18.0-20.0
	310S	0.08	200	0.045	0.03	1.5	19.0-22.0	24.0-26.0
	316	0.08	200	0.045	0.03	0.75	10.0-14.0	16.0-18.0	2.00 -3.00
	316L	0.03	200	0.045	0.03	0.75	10.1-14.0	16.0-18.0	2.00 -3.00
	317L	0.03	200	0.045	0.03	0.75	11.0-15.0	18.0-20.0	3.00 -4.00
	321	0.08	200	0.045	0.03	0.75	9.00-12.0	17.0-20.0		5C <Ti <0.70%
	347	0.08	200	0.045	0.03	0.75	9.00-13.0	17.0-20.0		10C <Cb +Ta <1.10%

		Mechanical Requirements			Hardness
ASTM	Grade	Tensile Strength Apa (ksi) min	Yield Strength Mpa (ksi)min	Elongation min%	Brinel max HB	Rockwell max HRB
A240	304	205(30)	205(30)	40	202	92
	304L	170(25)	170(25)	40	183	92
	310S	205(25)	205(25)	40	217	88
	316	205(30)	205(30)	40	217	95
	316L	170(25)	170(25)	40	217	95
	317L	170(25)	170(25)	40	217	95
	321	205(30)	205(30)	40	217	95
	347	205(30)	205(30)	40	183	92

Send Enquiry

Alloy Steel Plates SA 387

Chromoly is an abbreviation for "chromium-molybdenum steel". Chromoly is an alloy used to produce tubing for bicycle frames and race-car roll cages. It is not as lightweight as some steel alloys, but has the advantages of high tensile strength and malleability. It is also easily welded and is considerably stronger and more durable than standard (1020) steel tubing.

Chemical Composition of Sheets/ Plates

ASTM	Grade	C max	Mn max	P max	S max	Si max	Ni	Cr	Mo	Pipe Fittingss

A387 Class 1 Class 2	5	0.15	0.30-0.60	0.04	0.03	0.5		4.00-6.00	0.45-0.65



	9	0.15	0.30-3.60	0.03	0.3	1		8.00-10.0	0.90-1.10
	11	0.04-0.17	0.40-0.65	0.04	0.04	0.50-0.80		1.00-1.50	0.45-0.65
	12	0.04-0.17	0.40-0.65	0.04	0.04	0.15-0.40		0.80-1.15	0.45-0.60
	22	0.05-0.17	0.30-0.60	0.04	0.035	0.5		2.00-2.50	0.90-1.10

		Mechanical Requirements				Hardness
		Mechanical Requirements				Hardness
ASTM	Grade	Tensile Strength Apa (ksi) min		Yield Strength Mpa (ksi)min		Elongation min%	Brinel max HB	Rockwell max HRB
		Class 1	Class 2	Class1	Class2
A387 Class 1 Class 2	5	415-585	515-690	205	310	18	202	92
	9	415-585	515-690	205	310	18	217	95
	11	415-585	515-690	240	310	22	217	95
	12	380-550	450-585	230	275	22	217	95
	22	415-585	515-690	205	310	18	201	92

Send Enquiry