Steel Tubes

Commonly known as cupro-nickels, a range of Cupro Nickel Tube exists that posseses varied properties and thus are used in different applications. Some popular copper nickel alloys are-Copper with 30% nickel Copper with 10% nickel Copper with 5% nickelAll the copper nickel alloys for copper nickel alloy tubes have only one phase since the copper nickel binary system shows complete solid solubility. Generally properties vary in accordance to the composition, some properties are mentioned below The major variety are- Copper 90/10, Copper 95/5 and Copper 70/30The 95/5, 90/10 and 70/30 variety is more stronger and exhibits superior resistance to impingement corrosion It exhibits outstanding resistance to corrosion in particular to sea water It offers good resistance to biofouling as 95/5, 90/10 alloy being slightly superior compared to the 70/30 alloy.

MS and GI pipes are low carbon and zinc protected pipes respectively, used in a variety of industries. To get these extremely useful pipes at affordable prices, go for the renowned MS and GI pipes distributors. Generally, a huge amount of carbon is present in iron, which is used for making pipes and other harder materials. MS (Mild Steel) pipes or tubes contain a small amount of carbon (0.18% or less) steel. Low availability of carbon in MS pipes make them easy to use and less hard. These types of pipes are made from mild steel, a steel with low amount of carbon, and can be transformed into various shapes as well as sizes for multiple purposes like tubing and pipe lining.
Mild Steel pipes are used for the supply of drinking water i.e. Plumbing, Firefighting and HVAC (Heating, Ventilation and Air Conditioning). Along with this, these pipes are perfect to use in several industrial as well as engineering applications. MS pipes are coated with paints, varnish or other metals that help not only protect them from rusting but also make them long-lasting and work under critical conditions.

• Pay Mode Terms: T/T (Bank Transfer)

We are manufacturer and supplier of MS Rectangular Tube. We design the given product following industrial standards by making use of best quality material and modern technology.

Cold Drawn Seamless (CDS) as implied is made by cold drawing a larger mother seamless pipe, which is generally manufactured through a HFS process. In the CDS process, the mother pipe is pulled through a die & plug in cold without any heating. Because of the tool on outside and inside the surface and tolerances are better in CDS. While this is an additional process over HFS, it is necessary to get smaller size pipes which otherwise cannot be manufactured in HFS. Some applications which require close tolerances and smooth surfaces also specify the requirements to be necessarily CDS. CDS pipes & tubes are extensively used in Heat-Exchanger, Bearing & Automotive sectors.

• Pay Mode Terms: T/T (Bank Transfer)

AMCO METALS is a supplier & exporter of Air preheaters tubes which are used in air preheaters, which are devices that are commonly used in power plants and other industrial applications to increase the efficiency of boilers and furnaces. The tubes are typically made of metal, such as carbon steel or stainless steel, and are designed to withstand high temperatures and corrosive environments.

Air preheater tubes are used to transfer heat from the flue gases, which are produced by the combustion process, to the air that is used for combustion. The tubes are usually arranged in a heat exchanger configuration, with the hot flue gases passing over the outside of the tubes and the cool air passing through the interior of the tubes.

There are several different types of air preheater tubes, including plain tubes, finned tubes, and extended surface tubes. Finned tubes have external fins that increase the surface area of the tube, which can improve heat transfer efficiency. Extended surface tubes have internal fins that increase the turbulence of the airflow, which can also improve heat transfer efficiency.

Proper maintenance and cleaning of air preheater tubes is essential to ensure their efficiency and longevity. Accumulated deposits of ash, soot, and other contaminants can reduce the effectiveness of the tubes and even cause them to fail over time. Regular inspections and cleaning can help to prevent these issues and ensure optimal performance of the air preheater system.

• Delivery Time: Ready stock
• Packaging Details: HDPE BUNDLE PACKING

ASTM A179 is a specification that covers minimum-wall-thickness, seamless cold-drawn low-carbon steel tubes for tubular heat exchangers, condensers, and similar heat transfer apparatus. The term "ferrule insert" in the context of heat exchangers usually refers to a metal component inserted into the end of a heat exchanger tube to enhance the tube-to-tube sheet joint, provide support, and prevent fluid leakage.

We are manufacturer and supplier of ERW Tube. We design the given product following industrial standards by making use of best quality material and modern technology.

Amco Metals is a supplier of Inconel 602 CA which is a high-temperature compound that is known for its superb protection from oxidation and scaling at raised temperatures. It is generally utilized in gas turbine motor parts, for example, ignition chambers and max engine thrust parts, as well as in heat exchanger applications where high-temperature erosion opposition is required.
An intensity exchanger ferrule is a part used to get and seal cylinders or lines in an intensity exchanger. Inconel 602 CA heat exchanger ferrules are produced using the Inconel 602 CA compound and are known for their phenomenal protection from high-temperature erosion, warm cycling, and mechanical wear.
Inconel 602 CA heat exchanger ferrules are normally made to fulfill ASTM guidelines, for example, ASTM B166 or ASTM B167, which indicate the synthetic piece, mechanical properties, and assembling process prerequisites for Inconel 602 CA composite.
While choosing Inconel 602 CA heat exchanger ferrules, it is essential to consider the particular ecological circumstances where they will be utilized, including temperature, tension, and possible openness to destructive substances. Appropriate choice and establishment of intensity exchanger ferrules is basic to guarantee the general honesty and execution of the intensity exchanger.

Inconel 625 is a popular nickel-based alloy known for its excellent corrosion resistance and high-temperature strength. It is often used in demanding environments, including heat exchangers, due to its ability to withstand corrosive fluids and high temperatures. A ferrule insert made from Inconel 625 is designed to provide protection and support in heat exchanger applications

Amco Metals is a renowned manufacturer, distributor, and exporter of Air Pre Heater Tubes manufactured using premium-grade raw materials procured from certified vendors. We use advanced technology equipment and fabricate these tubes in accordance with national and international quality standards. Our Air Pre Heater Tubes are available in various sizes, types, dimensions, and thicknesses and also in customized specifications as per the requirements of our clients at the most reasonable prices.

The APH ERW Tubes are produced as hot rolled or cold drawn tubes, with welded and seamless ends. The size and grade of APH ERW tubes are determined by the design of the boilers, which is dependent on the kind of fuel, temperatures, pressures, and the amount of steam required.

Our Air Pre Heater ERW Tubes are widely used for manufacturing and maintaining boilers in power plants and process industries such as Chemical Industry, Sugar Industry, Power Plant, Steel Industry, Cooling Tower, Super Heater, Paper Industry, Air Heaters, Heat Exchanger, etc.

We are manufacturer and supplier of Galvanized Welded Tube to our clients. A galvanized welded tube refers to a type of metal tube that has undergone both galvanization and welding processes. A galvanized welded tube is produced by first creating a hollow tube through welding processes. This tube is then subjected to galvanization, where a layer of zinc is applied to the surface. The galvanization process provides protection against corrosion, making the tube suitable for outdoor applications or environments with exposure to moisture and other corrosive elements

We are manufacturer and supplier of Precision Tubes. We design the given product following industrial standards by making use of best quality material and modern technology.