New Items

Amco Metals are major  stockiest and Exporters of ASTM A335 P22 Seamless pipes.Habin wide range of stock form 1/2''NB to 16''NB sch 40 to Sch XXS

A ferric alloy steel, ASTM P22 is suitable for high temperatures and provides excellent corrosion resistance. We produce and supply a variety of forms of grade P22 to our customers, including round pipes, tubes, square pipes, coiled tubes, hydraulic tubes, etc. Grade P22 is a chromium-molybdenum alloy with excellent corrosion resistance under acidic conditions as well as high tensile strength under high temperatures. There is generally a higher proportion of alloying elements in alloy pipes than in any other standard carbon steel, with the most common alloying elements being molybdenum, chromium, nickel, etc. ASTM exhibits low-alloy steel pipes under their standards. 

Treated steel 304 and 316 are normal grades of austenitic tempered steel, which are generally utilized in heat exchanger applications because of their phenomenal consumption obstruction, high strength, and great weldability.
An intensity exchanger ferrule is a part used to get and seal cylinders or lines in an intensity exchanger. Treated steel 304/316 intensity exchanger ferrules are produced using these grades of tempered steel and are known for their amazing protection from erosion, warm cycling, and mechanical wear.
Treated steel 304/316 intensity exchanger ferrules are normally produced to satisfy ASTM guidelines, for example, ASTM A213 or ASTM A269, which indicate the compound sythesis, mechanical properties, and assembling process necessities for tempered steel tubing.
While choosing hardened steel 304/316 intensity exchanger ferrules, it is critical to consider the particular ecological circumstances where they will be utilized, including temperature, strain, and likely openness to destructive substances. Legitimate choice and establishment of intensity exchanger ferrules is basic to guarantee the general respectability and execution of the intensity exchanger.

AMCO METALS is a supplier & Exporter of BS 6323 PART V  ERW PIPES ,BS 6323 Part V refers to a specific British Standard that provides specifications for Electric Resistance Welded (ERW) steel pipes used in various applications. ERW pipes are a type of welded pipe that is manufactured by passing a high-frequency electrical current through the edges of a steel strip or coil to create a seam, which is then fused together under pressure.

BS 6323 Part V outlines the technical requirements and dimensions for ERW pipes. This standard covers a range of sizes, grades, and types of steel pipes that are suitable for general engineering purposes, automotive applications, and other similar uses. The pipes specified under this standard are typically used for conveying fluids, gases, or solid materials.

The standard covers aspects such as dimensions, tolerances, chemical composition, mechanical properties, and testing procedures for these ERW pipes.

• Delivery Time: Ready stock

Stainless Steel PVD (Physical Vapor Deposition) fabrication is a process used to create a durable and decorative surface finish on stainless steel. PVD is a vacuum coating process that involves the deposition of a thin layer of metal onto a substrate.

In the case of stainless steel PVD fabrication, a thin layer of metal, such as titanium or zirconium, is deposited onto the surface of the stainless steel substrate. This creates a hard, durable, and decorative finish that is resistant to wear, corrosion, and fading.

Stainless steel PVD fabrication can be used for a variety of applications, including architectural and decorative elements such as cladding, trim, and fixtures. The process can also be used to create custom finishes, including brushed, polished, or matte surfaces.

Stainless steel PVD fabrication is a popular choice for its durability and resistance to wear and corrosion, as well as its aesthetic appeal. The process allows for a wide range of customization options, including color and texture, making it a versatile and popular choice for a variety of design applications.

Ground finished machined bars are metal bars that have undergone a finishing process to achieve a high level of dimensional accuracy and surface finish. This process involves the use of specialized machinery that removes any surface imperfections, burrs, or roughness, resulting in a smooth, polished surface.

These bars are typically made from materials such as steel, stainless steel, aluminum, brass, or copper, and are commonly used in various applications that require high precision and quality, such as in the aerospace, automotive, and medical industries.

The advantages of using ground finished machined bars include improved surface quality, precise tolerances, and increased durability and longevity. These bars are also easier to machine and work with, allowing for faster production times and reduced waste.

BS 3059 Part 1 Pipes are used for low and medium pressure applications in industries such as oil and gas, petrochemical, and power generation. They are designed to withstand pressure up to 17.5 bar and are available in various sizes, thicknesses, and grades.

BS 3059 Part 2 Pipes are used for higher pressure applications, typically in boilers and heat exchangers. They are designed to withstand pressure up to 50 bar and are available in various sizes, thicknesses, and grades. These pipes are commonly used in power plants and other industries that require high-pressure piping systems.

Amco Metals is the largest stockiest of A pre-fabricated spool, often referred to as a "prefab spool," is a pre-assembled and pre-tested section of piping or tubing that includes fittings, valves, and other components. Prefabricated spools are commonly used in industrial construction projects, especially in sectors like oil and gas, petrochemicals, power generation, and more. They offer several advantages in terms of efficiency, quality control, and project timeline. Here's more information about pre-fabricated spools

Titanium Grade 5 (Ti-6Al-4V) clasp are a sort of high-strength, erosion safe latch produced using a composite of titanium, aluminum, and vanadium. They are known for their great solidarity to-weight proportion, high erosion opposition, and great high-temperature execution.
Titanium Grade 5 latches are regularly utilized in aviation, marine, and clinical applications, where high strength and erosion opposition are basic. They are additionally utilized in athletic gear, auto, and substance handling applications.
Titanium Grade 5 clasp are accessible in different kinds, including screws, nuts, fasteners, washers, and strung poles. They are regularly fabricated to satisfy ASTM guidelines, for example, ASTM F468 or ASTM B348, which indicate the compound creation and mechanical properties of titanium Grade 5 clasp.
While choosing titanium Grade 5 latches, it is essential to consider the particular application and ecological circumstances wherein they will be utilized. Factors, for example, temperature, feelings of anxiety, and expected galvanic consumption with different metals ought to be considered to guarantee the fitting clasp is chosen for the gig. Exceptional consideration should likewise be taken while introducing titanium clasp, as they tend to annoy while possibly not appropriately greased up during establishment.

Amco Metals is a supplier of Titanium Grade 12 (Ti-0.3Mo-0.8Ni) latches which are a sort of erosion safe clasp produced using a compound of titanium, molybdenum, and nickel. They are known for their great erosion obstruction, especially in conditions containing chlorides, settling on them a famous decision for marine and compound handling applications.
Titanium Grade 12 latches are additionally known for their high strength, great pliability, and great weldability. They are ordinarily utilized in compound handling, oil and gas, marine, and clinical applications, where high erosion obstruction and strength are basic.
Titanium Grade 12 latches are accessible in various sorts, including screws, nuts, fasteners, washers, and strung poles. They are regularly produced to satisfy ASTM guidelines, for example, ASTM F467 or ASTM B348, which determine the substance sythesis and mechanical properties of titanium Grade 12 clasp.
While choosing titanium Grade 12 latches, it is critical to consider the particular application and natural circumstances wherein they will be utilized. Factors, for example, openness to destructive substances, temperature, feelings of anxiety, and possible galvanic erosion with different metals ought to be considered to guarantee the proper latch is chosen for the gig. Exceptional consideration should likewise be taken while introducing titanium clasp, as they tend to bother while possibly not appropriately greased up during establishment.

Amco Metals is a supplier of taper plug gauge which is a precision measuring instrument used to check the size and taper of a hole or opening. It consists of a cylindrical-shaped rod with a tapered end that matches the taper of the hole being measured. The rod is typically made from a hard, durable material like steel or carbide.

To use a taper plug gauge, the gauge is inserted into the opening being measured and rotated to ensure a uniform fit. The taper on the gauge should match the taper of the opening as closely as possible, allowing for an accurate measurement of the size and taper.

Taper plug gauges are commonly used in manufacturing and quality control applications to ensure that machined parts and components meet the required specifications. They are particularly useful for measuring the size and taper of holes in pipes, valves, and other components used in fluid and gas systems.

Taper plug gauges come in a range of sizes and shapes to accommodate different types of openings and applications. They are often used in conjunction with other types of gauges and measuring instruments to ensure that components are manufactured to the required tolerances and specifications.

Amco Metals is a supplier of Zeron 100 which is a sort of really duplex tempered steel that is known for its phenomenal consumption opposition, especially in unforgiving conditions containing chlorides, going with it a famous decision for seaward and marine applications.
Zeron 100 has a two-stage microstructure comprising of both austenitic and ferritic stages, which invigorates it an exceptional mix of high, phenomenal consumption opposition, and great weldability. It likewise has great protection from pitting and cleft erosion, as well as pressure consumption breaking.
Zeron 100 is usually utilized in oil and gas, synthetic handling, and marine applications, where high erosion obstruction and strength are basic. It is likewise utilized in mash and paper creation, food handling, and desalination plants.
Zeron 100 is accessible in various structures, including sheets, plates, bars, lines, and fittings. It is commonly made to fulfill ASTM guidelines, for example, ASTM A240 or ASTM A276, which indicate the substance sythesis and mechanical properties of Zeron 100.
While choosing Zeron 100 for an application, it is essential to consider the particular ecological circumstances where it will be utilized, as well as elements, for example, temperature, feelings of anxiety, and likely galvanic consumption with different metals. Legitimate choice and establishment of clasp, like Zeron 100 fasteners and nuts, is additionally essential to guarantee the general trustworthiness of the hardware.

Prefabricated piping spools are pre-manufactured sections of piping that are designed and constructed off-site and then transported to the installation location. The piping spools are typically pre-fabricated to exact specifications and include any necessary fittings, flanges, and valves.

Prefabricated piping spools offer several advantages over traditional on-site installation methods. By manufacturing the spools in a controlled factory setting, quality can be assured, and production time can be optimized. This results in faster installation times and reduced labor costs on site.

Stainless steel PVD brass T profiles are likely stainless steel profiles that have been coated using the PVD process with a brass-like finish. This creates a visually appealing and durable surface that resembles brass but retains the advantages of stainless steel, such as corrosion resistance and durability.

The "T" profile likely refers to the shape of the profile when viewed from the end, resembling the letter "T." This shape is commonly used in architectural and design applications, as it can be used as a decorative element, a structural component, or for joining different sections of material.

By applying a PVD brass coating to stainless steel T profiles, you can achieve the appearance of brass while benefiting from the strength and corrosion resistance of stainless steel. This combination of materials and processes is often used in interior design, architecture, furniture manufacturing, and other applications where both aesthetics and functionality are important.

Amco Metals are supplier and stockiest of  Stainless steel PVD T profiles are stainless steel profiles that have undergone a PVD (Physical Vapor Deposition) coating process to enhance their appearance, durability, and resistance to wear and corrosion. The "T profile" typically refers to a profile that resembles the letter "T" in its cross-section. These profiles are often used in architectural, interior design, and industrial applications for both decorative and functional purposes.

Amco Metals are the Manufacturer and Supplier of Monel 400 fasteners are fasteners made from Monel 400, a nickel-copper alloy known for its excellent corrosion resistance, high strength, and good mechanical properties. Monel 400 is a versatile material used in various industries, especially those involving corrosive environments.

Fusion Bonded Epoxy (FBE) coating on flanges is a protective coating method used to provide corrosion resistance to flange surfaces in various industrial applications, particularly in pipelines, petrochemical plants, and offshore structures. FBE is a type of thermosetting powder coating that adheres to the surface when heated, creating a durable and corrosion-resistant layer.

Amco Metal is the largest stockiest of Copper-nickel (Cu-Ni) ferrule inserts are components used in various industries, especially in applications involving tubing systems and piping systems that require resistance to corrosion and erosion. These inserts are typically used in marine environments, offshore structures, and other systems where exposure to seawater, brine, or other corrosive fluids is a concern. Here's what you need to know about Cu-Ni ferrule inserts

Amco Metals is the largest stockiest ofA PTFE-lined paddle blind refers to a type of industrial equipment used in piping systems for isolating or blocking the flow of fluids. This equipment is specifically designed with a lining of PTFE (Polytetrafluoroethylene), a synthetic fluoropolymer known for its exceptional chemical resistance and non-stick properties.

An Inconel 601 ferrule insert refers to a component made from Inconel 601, a high-temperature nickel-chromium alloy with excellent mechanical properties and resistance to corrosion and heat. Ferrule inserts are commonly used in various industrial applications, including sealing, connecting, and reinforcing components in systems that experience high temperatures, pressure, and corrosive environments.

Inconel 601 is known for its exceptional resistance to oxidation, carburization, and other forms of high-temperature corrosion. This makes it suitable for use in environments involving furnace components, petrochemical processing, heat treatment equipment, and more.

The term "ferrule" generally refers to a ring or sleeve-like component that is used for various purposes, including providing support, reinforcement, alignment, or sealing. When combined with the properties of Inconel 601, an Inconel 601 ferrule insert could be used in situations where high-temperature stability, corrosion resistance, and mechanical strength are required.

Amco Metals are Manufacturer Supplier CNC turned components refer to parts or products that have been manufactured using a CNC (Computer Numerical Control) lathe machine. CNC turning is a machining process used to produce cylindrical parts by removing material from a rotating workpiece using cutting tools. It's a highly precise and efficient method commonly used in various industries to create complex shapes and components.

Rotor shafts, also known as rotor axles or simply rotors, are crucial components in various mechanical systems, particularly those involving rotating parts, such as engines, turbines, motors, generators, and pumps. Rotor shafts play a fundamental role in transmitting power from the energy source to the rotating elements, allowing these machines to perform their intended functions.

Amco Metals are Manufacturer and Supplier of Taper plugs are specialized types of threaded plugs used for sealing holes, pipes, or openings. They have a tapered or conical shape that allows them to fit snugly into a threaded hole, providing a secure seal. Taper plugs are commonly used in various industries for applications that require leak-tight closures, pressure resistance, or protection from contaminants.

Amco Metals Manufacturer and Supplier of Stainless Steel Skirtings, also known as baseboards or base moldings, are architectural elements used in interior design to cover the joint between the wall surface and the floor. They serve both functional and aesthetic purposes in a space. Skirtings are typically installed along the bottom edge of interior walls, providing a clean and finished look while also protecting the wall from scuffs, scratches, and minor impacts.

• Delivery Time: Ready Stock

Brass is a popular material for table tops due to its durability, aesthetic appeal, and resistance to corrosion and tarnishing.

Brass table flat sheets are available in a variety of sizes, thicknesses, and finishes, ranging from highly polished to brushed or satin finishes. The thickness of the sheet can vary depending on the desired application and the level of durability required. Thicker sheets are generally more durable and can withstand more wear and tear