Stainless Steel Pipes

We are manufacturer and supplier of 317L Stainless Steel Pipes. Alloy 317L is a molybdenum-containing, low carbon austenitic stainless steel with increased additions of chromium, nickel, and molybdenum for better corrosion resistance and increased resistance to chemical attack for sulfurous, acetic, formic, citric, and tartaric acids. Due to its low carbon content, 317L also provides resistance to sensitization when welded and higher creep, stress to rupture, and tensile strength at elevated temperatures. It is non-magnetic in the annealed condition but may become slightly magnetic after welding.

Stainless Steel Round Pipe is the most common grade used in oil ad gas industries, manufactured by basic-oxygen or electric-furnace processed and must have the following chemical requirements: carbon, manganese, phosphorus, sulfur, copper, nickel, chromium, molybdenum, and vanadium. The tubing shall undergo a seamless or welding process. Tension, bend, and flattening tests shall be performed to make sure that it must adhere to the mechanical properties of the standard.

Type 304 stainless steel is a 304 Stainless Steel Pipes austenitic. It has at least 18% chromium and 8% nickel, joined with a most extreme of 0.08% carbon. It is characterized as a Chromium-Nickel austenitic alloy. Grade 304 is the standard "18/8" stainless that you will most likely find in your container and cookery apparatuses. Grade 304L is the low carbon rendition of 304. It doesn't require post-weld tempering as is broadly utilized as a part of overwhelming gage segments (over around 6mm). Grade 304H with its higher carbon content discovers application at raised temperatures.

These are some of its characteristics:

• Forming and welding properties
• Corrosion/ oxidation resistance thanks to the chromium content
• Deep drawing quality
• Excellent toughness, even down to cryonegic temperatures which are defined as very low temperatures
• Low temperature properties responding well to hardening by cold working
• Ease of cleaning, ease of fabrication, beauty of appearance

904L Stainless Steel Pipe is a high-alloy austenitic stainless steel with low carbon content. The evaluation is planned for use under extreme destructive conditions. Basically, 904L is completely austenitic and is less touchy to precipitation ferrite and sigma stages than traditional austenitic evaluations with high molybdenum content. Typically, because of the blend of the moderately high substance of chromium, nickel, molybdenum and copper 904L has good resistance to general corrosion, particularly in sulfuric and phosphoric conditions.

We are manufacturer and supplier of Stainless Steel Pipes to our valuable clients.

We are a paramount organization that is involved in manufacturing, supplying and exporting superior quality range of Rectangular Pipe. Designed as per industry standards, our offered pipes are provided to patrons in different lengths, thicknesses and designs at reasonable prices. Also, we stock these pipes in our warehouse for meeting urgent needs of patrons.

We are manufacturer and supplier of Fabricated Steel Pipes. It is manufactured using quality raw materials and latest technology. Our fabrication facilities produce pipe spools, headers, manifolds, and skid-mounted piping and equipment modules that are utilized in a diverse range of industries, including power generation, refineries, water treatment, renewable fuels, and manufacturing facilities.

321 Stainless Steel Pipes, also known as UNS S32109, is the higher carbon variant of the 321 grade, to give higher temperature quality. Stainless Steel 321/321H pipes and tubes are accessible in both consistent and welded structure in OD and NB sizes. In addition to standard sizes, which are accessible in stock, our claim to fame is to fabricate and supply custom size 321/321H cold drawn seamless tubes from our processing plant.

Features:

• High temperature chemical process heat exchanger tubes
• Refineries
• High temperature steam service

347 Stainless Steel Pipes is generally used where corrosive conditions are severe, such as aircraft exhaust stacks, manifolds and ring collectors. Type 347 is also used for heavy welded assemblies which cannot be annealed after welding or where the operating conditions cause exposure within the temperature range between 800° to 1500°F.

Features:

• Good creep strength up to 1500°F
• Maintains good corrosion resistance in applications where the temperature is between 800°F and 1500°F.
• Good resistance to intergranular corrosion in the as-welded condition.

316 Stainless Steel Pipes is the standard molybdenum-bearing grade, second in importance to 304 amongst the austenitic stainless steels. The molybdenum gives 316 better overall corrosion resistant properties than Grade 304, particularly higher resistance to pitting and crevice corrosion in chloride environments. It has excellent forming and welding characteristics. It is readily brake or roll formed into a variety of parts for applications in the industrial, architectural, and transportation fields. Grade 316 also has outstanding welding characteristics. Post-weld annealing is not required when welding thin sections. Grade 316L, the low carbon version of 316 and is immune from sensitisation (grain boundary carbide precipitation). Thus it is extensively used in heavy gauge welded components (over about 6mm). Grade 316H, with its higher carbon content, has application at elevated temperatures, as does stabilized grade 316Ti.

Any of our products can be polished to a 180 or 320 grit. Polishing to a 320 grit is also known as a mirror finish. 180 polishing is also known as the brushed or satin finish. Our various satin finishes will produce the perfect polished piping. We can polish all of our welded or seamless piping products.

Cold finished Tubes/Pipes are produced out of quality seamless hollows which are manufactured in house in unit-III. Seamless hollows are either cold pilgered over pilger mills or cold drawn over draw benches using precision tooling (dies & plugs) to achieve perfect dimensions and smooth surfaces. Pilgered / Drawn tubes are subjected to heat treatment, straightening and surface treatment. Finished tubes/pipes undergo various testing as per the specification /customer's requirements followed by marking and packing. We are manufacturer and supplier of Cold-Drawn Stainless Steel Pipe. We design the given product following industrial standards by making use of best quality material and modern technology.

We supply a full range of Square Tube ASTM A554 schedules ranging from Sch 5 thru Double Extra Heavy, we deliver Stainless Steel Square Tube ASTM A554 with Exceptional sizes & Quality.

Amco metals are stockiest and supplier of GI Square PipeGI Square Pipe contains substantial quantities of elements other than carbon such as nickel, chromium, silicon, manganese, tungsten, molybdenum, vanadium and limited amounts of other commonly accepted elements such as manganese, sulphur, silicon, and phosphorous. Addition of such alloying elements is usually for the purpose to increase hardness, strength or chemical resistance. Pipes made of alloy steel have exceptional performance properties.These are generally developed for energy-related applications involving oil and gas drilling and are subjected to stresses in machine parts. Brands we offer ismt- indiabenteler- germanyarcelor mittal- south africavallourec - brazil & france & many more.

Our company is the renowned manufacturer and supplier of Slotted Pipes which includes Double Slot Pipe, Oval Slot Pipes and Square Slot Pipe. These slot pipes have excellent functionality and are quite durable. In addition to this, these are available in a plethora of specifications and ranges. Finally, these are available in mesmerizing range and patterns.

We are manufacturer, supplier and exporter of Jindal GI Pipe. We are having wide range.